Posts Tagged ‘Architecture’

Building the field stone wall at the east entrance.

The snow has melted, the ground is thawed and we are back at work outside finishing the permeable pavers, building the Connecticut field stone wall at the entrance, and finishing the landscaping.  All of the parking is in the rear of the building and the main store entrance will be on the east side of the building.   Above the wall that Granscapes’ Mark and Sean are building will be a glass enclosed entranceway.   The bright green material is a barrier to stop any water that penetrates the stone and the detail below illustrates how the stone is anchored to the frame wall.

Field Stone Wall Detail

Package Store Interior

Back on the inside we have finished the floor and are installing the kitchen cabinets, light fixtures, wine refrigerators, and plumbing.

The is a lot to do to finish the project – below Oyster Works’ Jeremiah Bowman moves the paving blocks – he has three pallets to unload before dinner.

Jeremiah Bowman moving the paving blocks.

Granite Curbs and Gravel Base

The inside is being painted and soon we’ll be laying the WarmBoard, installing the radiant heat, and laying the floor.   But for now…most of the action is outback.

As part of our eco-friendly design we are installing permeable paving stones for all of the parking areas. This will allow the rain water to drain naturally back into the ground and reduce the need for underground drainage and retention ponds. Permeable pavers are initially more expensive than asphalt, but have a much longer life span and can be less expensive over the life of a building.

Preparation is difficult work – the grades must be perfect, the gravel well compacted, and the granite curbs set to exacting tolerances. We are fortunate to be working with Morrone Excavation and Grandscapes on the site work and landscaping.

Candelabras…In keeping with our blend of tradition, green design, and energy efficiency, we are using computer controlled energy saving LED lighting and candelabras that are made from from oak wine barrel staves.  Take a look!

Sean & Mark of Grandscapes setting the granite curb

Mike Morrone and Brendan Friend setting the grades.

Wine Barrel Candelabras

Jeff Brennan (UBS) & Megan Moynihan; Breck Tully & Tim Van Wormer

Oyster Works’  commitment to sustainable design and building a sensibly green building is dependent upon an efficient and coordinated team that includes subcontractors and material suppliers.

We are very fortunate to work with Jeff Brennan of United Builders Supply (UBS), pictured here with architect Megan Moynihan and Breck Tully and Tim Van Wormer of T & J Construction.  In addition to providing lumber and fasteners, Jeff has gone the extra mile and helped us purchase specialty products, including NuCedar Siding and Unilock Permeable Pavers.   A tip of the hat and thanks to Jeff and the team at UBS!

Elsewhere on Site…

On the outside we are finishing the NuCedar siding and preparing the site for landscaping and paving. All of the underground systems are installed and Morrone Excavation is screening the top soil.

Morrone Excavation Screening the Top Soil

When we started the project we removed and stockpiled all of the topsoil. Before we spread the soil  to establish a base for the landscaping, we are screening it to remove all the stones.

Inside we are working to complete the rough plumbing, finishing the electrial wiring, and installing the geothermal equipment. All of this is precise work made more difficult by a timber frame builidng with exterior walls made out of solid EPS panels.  T & J Construction is doing the siding and general carpentry, Stedman and Kazounis  the plumbing,  Century Electric the lighting and fire alarms, and Alares and Mercury Tec the geothermal system.

Thanks! to all.

Phil Boster and Architect Megan Moynihan

Doug Ainley installing the geothermal equipment

Tim Van Wormer applying silicone to the plywood backer board.

We are using Eagle HarborMaster Windows – special thanks to Chris Burgess of Eagle Windows for helping us with our order!  The construction and glazing of these windows is designed to stand up to a hurricane.   Testing  includes firing a 2×4 into the glass (the wood is shot out of a canon at 50 feet per second) and repeated pressure changes (up to 9,000 cycles) to simulate hurricane conditions. Needless to say – we want to put them in right.

First we use a laser level to establish a line that runs all around the building.   Next, we build out around the windows with 1/2 plywood to allow the siding to properly align with the trim.   Then two beads of silicone caulk are applied to the plywood and the window is set and fastened through the nailing flanges.

Window fastened through nailing flanges

After the window is nailed to the wall the entire nailing flange and backer board is covered with Vycor – a thick piece of rubber backed with adhesive.  While the window is being installed from the outside Breck Tully makes sure that everything is square and true on the inside.

Finally the window is fastened to the  framing with metal straps that are visible in the inside photograph.  The straps are to prevent the windows from blowing out of the building due to the severe low pressure that accompanies a hurricane.

Breck Tully centering the window

Vycor over the window flange

Mike Morrone, Megan Moynihan, Mike Morrone

The shell is complete.   Most of the big equipment (cranes, well drillers, lulls, and lifts) is gone.   We are back working on the site and beginning the exterior of the building.  We are committed to handling all of the water on site through careful grading to channel the run off and the use of permeable paving stones.   Mike Morrone, Megan Moynihan, & Mike Morrone meet to go over the grades while Joe Morrone loads the dumptruck with fill we are taking off site.

Kerianne and Ginny Garston

………………………… Earlier in the day Kerianne’s parents visited and we took them for a tour of the site.  Kerianne Garston, from Pratt Institute, is working with us as an interior design intern and is doing wonderful work on the look of the new store.

Family resemblance?   We didn’t see it at first.   But, after we offered Kerianne an internship position, we found out that Mike Morrone is Uncle Mike – Kerianne’s mom and Mike are sister and brother.

Uncle Mike was gone so Kerianne and Ginny decided to climb up on the Big Cat.